Results
Sprue diameter—mm
Runner diameter—mm
Gate depth—mm
Gate width—mm
Runner volume—cm³
Runner scrap share—%
Est. injection pressure loss—MPa
Design tips
- Enter parameters, then click “Calculate recommended sizes”.
Hot-runner results
Tip diameter—mm
Manifold bore—mm
Hot-runner hold-up—g
Est. heater power—kW
Hot-runner pressure drop—MPa
Material saved vs cold—kg/h
Savings per hour—CNY/h
Hot-runner tips
- Enter parameters, then calculate.
Gate location recommendation
Recommended gate: —
Gate count: —
Balance analysis
Path ratio Lmax/Lmin—
Est. fill-time difference—%
Rating—
Optimization tips
- Enter path parameters, then analyze.
Cold-runner structure diagram
Updates from calculator parameters (recalculate to refresh)
Sprue
Runner
Gate
Cavity